Friday, October 16, 2015

Krom Dragongaze (part 6)

Here is the finished base before adding snow. It was made from Magic Sculpt by rolling into thin sheet and cut into pieces with side cutter, then glued to the base and sanded the excess that over from the edge. The ork skull came from the Krom kit, I cut it from its base and placed in a new position. The ground was made from soil and glued to the base with super glue then added dry grass made from hemp rope.

ภาพส่วนของฐานที่ทำสีเสร็จแล้วก่อนที่จะทำส่วนของหิมะครับ ผมใช้อีพ็อกซี่ Magic Sculpt มาทำฐาน โดยการนำไปรีดเป็นแผ่นแล้วตัดออกมาเป็นชิ้นๆด้วยคีมตัดพลาสติก จากนั้นนำมาจัดเรียงแล้วติดกาวลงบนฐาน เมื่อกาวแห้งแล้วก็ขัดส่วนที่เกินจากขอบฐานให้ขอบนั้นเรียบเสมอกัน ก็จะได้ขอบฐานแบบที่เห็น จากนั้นก็ทากาวช้างแล้วใช้ดินมาโรยทำเป็นพื้น นำหินก้อนเล็กๆมาติด และทำกอหญ้าแห้งจากเชือกป่านครับ ส่วนหัวกะโหลกของออร์คนั้นมีมาให้พร้อมกับมินิตัวนี้ครับ ผมตัดออกมาจากฐานเดิมของมันแล้วนำมาจัดวางใหม่






For making snow, I used snow flock from Gale Force Nine. This product has very fine grain and easy to use. I mixed it with Vallejo Satin Varnish and painted on the base with an old paint brush. It was done twice in order to create more volume of snow. 
I am quite happy with the result of this method, because the color of the snow does not look too bright (or too white) in my opinion. I can glaze over the snow with White again if I want or maybe mix a bit of White in the mixture next time. 

ส่วนการทำหิมะ ผมใช้ผงหิมะเทียมของ Gale Force Nine ครับ จะมีลักษณะของเกล็ดหิมะที่ค่อนข้างละเอียดเป็นผงเล็กๆสีขาว  ผมนำมันไปผสมกับ Satin Varnish ของ Vallejo แล้วนำไปทาลงบนฐานด้วยพู่กันเล็กๆ ตอนที่หิมะยังเปียกอยู่นี้มันจะดูเป็นก้อนใหญ่จากสีที่ผสมอยู่ แต่เมื่อแห้งแล้วมันจะยุบตัวลงไปพอสมควร ดังนั้นจึงต้องมาทับอีกรอบเพื่อให้หิมะนั้นมีปริมาตรมากขึ้นและดูเป็นก้อนครับ  
ส่วนตัวแล้วผมค่อนข้างพอใจกับการทำหิมะด้วยวิธีนี้ เพราะว่าง่ายในการทำและหิมะนั้นจับตัวเป็นก้อนได้ดีและมีพิ้นผิวที่ดูเป็นเกล็ดเล็กๆ รวมถึงสีของหิมะนั้นไม่ดูสว่างหรือขาวเกินไป แต่ถ้าอยากให้ดูขาวมากกว่านี้ก็อาจจะใช้สีขาวผสมกับ Satin หรือ Gloss Varnish มาทาเคลือบบางๆอีกรอบ หรือไม่ก็อาจจะผสมสีขาวเพิ่มไปในส่วนผสมของหิมะกับสีเคลือบตั้งแต่ต้นเลยก็ได้ครับ 



Monday, October 12, 2015

"A Wave of Heroes"

Sculpted & Painted by Bill Horan

Yesterday I was so lucky to see the latest finished project by Bill Horan at SCAHMS meeting in La Palma. It's truly another masterpiece from him and I don't have to say anything more because his work speaks for itself. It was pity that I didn't bring my camera yesterday so I have only a few photos from my phone, sorry about the poor quality. I really want to share it with you guys and hope you all enjoy it! 

เมื่อวานมีโอกาสได้ชมผลงานชิ้นล่าสุดของ Bill Horan ที่งานมีตติ้งของ SCAHMS ครับ เป็นผลงานที่น่าทึ่งมากๆและก็โชคดีมากๆที่ได้ดูชิ้นงานจริง เลยถ่ายภาพมาฝากกันครับ น่าเสียดายที่เมื่อวานผมไม่ได้เอากล้องติดไปเลยมีแค่ภาพที่ถ่ายมาจากโทรศัพท์เท่านั้น ขออภัยที่ภาพอาจจะดูไม่ค่อยชัดเท่าไหร่ หวังว่าคงจะชอบกันนะครับ







Friday, October 2, 2015

Krom Dragongaze (part 5)

For painting the wolf cloak, I decided to use the same color scheme as seen on Krom Dragongaze's official picture. It was done by using wet blending technique to create gradation of color from dark on the top to light on the bottom, then added a highlight on each fur with a lighter color to create details and depth. For example, use Leather Brown to highlight Dark Brown, use Leather Brown + Sand Yellow to highlight Leather Brown, use Sand Yellow to highlight Leather Brown + Sand Yellow, etc.

สำหรับการเพนท์สีของผ้าคลุมหมาป่า ผมเลือกที่จะทำสีในโทนน้ำตาลแบบเดียวกับที่เห็นในภาพโปรโมทของมินิตัวนี้ เป็นสีน้ำตาลเข้มที่ส่วนหัวของหมาป่าแล้วไล่ระดับสีจนเป็นสีอ่อนที่ส่วนเท้า โดยผมใช้การทาไล่สีหรือเกลี่ยสีแบบเปียกที่เรียกกันว่า wet blending ซึ่งจะเหมาะกับลักษณะของพื้นผิวที่ขรุขระแบบนี้ เพราะสีจะค้างอยู่ตามร่องทำให้สีนั้นแห้งช้าลง มีเวลาในการเกลี่ยสีมากขึ้น ทำให้การทาเกลี่ยไล่ระดับสีจากอ่อนไปแก่นั้นทำได้ง่ายขึ้น จากนั้นจึงค่อยมาทาเก็บสีไฮไลท์บนขนแต่ละเส้นอีกครั้งด้วยสีที่อ่อนกว่า จะเป็นการเพิ่มรายละเอียดให้กับเส้นขนและทำให้ขนนั้นดูมีมิติมากขึ้นด้วย 
ตัวอย่างของการทาด้วยสีที่อ่อนกว่า หากสีขนตรงบริเวณนั้นเป็นสีเข้มอย่าง Dark Brown ให้ใช้สีที่อ่อนกว่าอย่าง Leather Brown มาทาเป็นไฮไลท์ หรือถ้าสีขนบริเวณนั้นเป็นสี Leather Brown ให้ใช้สีที่อ่อนกว่าอย่าง Leather Brown ผสมกับ Sand Yellow มาทาเป็นไฮไลท์ เป็นต้น



For painting the force axe, I used Intense Blue (VMC 70925) mixed with Turquoise (VMC 70966) for the axe blade. The rest was finished with NMM technique and you can see a list of the colors for NMM below.

NMM Gold; Scrofulous Brown (VGC 72038), Armor Brown (VMA 71041), White (VMC 70951) *Ben Komets's recipe. 

NMM Silver; Intermediate Blue (VMC 70903), Turquoise (VMC 70966), White (VMC 70951), Black (VMC 70950)

ส่วนการทำสีของขวาน ผมใช้สี Intense Blue (VMC 70925) ผสมกับ Turquoise (VMC 70966) เป็นส่วนของใบขวาน ส่วนสีโลหะที่เหลือจะใช้การเพนท์ด้วยเทคนิค NMM (Non-Metallic Metal) และสามารถดูรายชื่อสีที่ใช้ได้ด้านล่างครับ

NMM Gold; Scrofulous Brown (VGC 72038), Armor Brown (VMA 71041), White (VMC 70951) *Ben Komets's recipe. 

NMM Silver; Intermediate Blue (VMC 70903), Turquoise (VMC 70966), White (VMC 70951), Black (VMC 70950)